Omcan Aurora DA-CN-0353, Инструкция по эксплуатации

Страница: 18 / 24

18
Troubleshooting
revert to a preset temperature setting.
Most power failures are corrected within a short period of time. An hour or two’s loss of power will not affect
cabinet’s temperatures. To avoid sudden change of temperature while the power is off, you should avoid
opening the door. For longer period of power failure, do take steps to protect your meat or food.
Irrespective of the cause, if you notice either abnormal temperature or humidity levels inside your
cabinet, be reassured that only long and frequent exposure to these abnormal conditions can cause a
detrimental effect on your meat or food.
Common problems may easily be solved, saving you the cost of a possible service call.
Please read carefully the instruction manual and revert to troubleshooting guide chart.
PROBLEM POSSIBLE CAUSE
Cabinet does not operate. Not plugged in.
The appliance is turned off.
The circuit breaker tripped or the fuse is broken.
Cabinet is not cold enough. Check the temperature control setting.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off frequently. The temperature in the cabinet is higher than conventional.
The door is opened too often.
Storage overload in the cabinet
The door is not closed completely.
The temperature is not set correctly.
The door gasket does not seal properly.
The light does not work. Not plugged in.
The circuit breaker tripped or a blown fuse.
The light is damaged.
The light is “OFF”.
Vibrations. Please check whether the cabinet is on level ground.