Omcan 59020, Инструкция по эксплуатации

Страница: 10 / 48

10
Operation
OPERATING THE MACHINE WITH TEN-PROGRAM CONTROL SYSTEM
On: Turns the machine on:
• The machine will start up in the most-recently used program.
• The pump of a machine with a transparent cover will start when the cover is closed.
Off: Turns the machine off:
• When pressing the button once, the symbol will start blinking and the pump will stop
after about 4 seconds.
• When pressing the button a second time, the pump will stop immediately.
• Closing the cover will initiate the cool-down phase.
• The machine will complete a number of vacuum cycles before turning off automatically.
Stop-function:
• Stops the machine at any point in the cycle and aerates the chamber.
Reset-function:
• While programming, resets the program value to its original setting.
• Press the menu button to return to the Home menu.
Back function:
• While reviewing programmed values, returns to the previous selection.
Stops the active function and initiates the next step in the cycle:
• While the machine is running, exits the active function and jumps to the next step in the cycle.
• While packing sauce or soup, the package may be sealed as soon as product boiling is
detected.
Menu Button:
• Toggles between Home menu and Settings menu .
• Save Function: During programming, confirms and saves the entered program values and
returns to the Home menu.
• Return Function: Returns to the Home menu.
Review program values:
• Cycles through programs P1 to P9, as well as PA and P H2O.
• Displays the programmed value for each function; the function being reviewed will be
blinking.
• Displays the value for the next function.
• Returns to the Home menu.
Adjust program values and turn functions ON/OFF:
• Forward or back; adjusted values are saved right away.
• Increases or decreases function values.
• Turns functions ON/OFF; specific functions, like soft-air, clean cut seal, etc., are turned
either on or off.
• If the function is turned on, the value may be adjusted by pressing the and buttons.
• Resets the original value.
• Saves changes and returns to the Home menu.