Omcan 47468, Инструкция по эксплуатации

Страница: 7 / 16

7
Installation
Operation
Warning: Keep children away from the foam and other package materials, which is dangerous.
1. Find a location for your ice crusher where it’s protected from direct sunlight and other sources of heat (i.e.
stove, furnace, radiator). Place the ice crusher on a level surface. Make sure that there is at least 15cm
of space between the back and sides of your ice crusher and the wall. Don’t place anything on your ice
crusher.
2. The appliance must be positioned where the plug is accessible.
NOTE: Improper installation may cause injury to people or objects.
1. The socket must be grounded.
2. The fuse on the PCB must be >10A.
3. If the power cord need to be changed, it must be changed by a certified technician.
4. Voltage fluctuation can’t exceed ±10% than the rated voltage, or a voltage stabilizer is needed.
Clean the interior with lukewarm water and a soft cloth, the blade is very SHARP, operate with care. Don’t pour
water directly in the hopper to clean which will damage the motor. Unplug the ice crusher before cleaning.
The use of any appliance must follow basic guidelines, in particular:
• High humidity environment will increase the risk of short circuit or electric shock. If in doubt, cut off the
power of the ice crusher.
• Please do not directly pull down the power cord to turn off the machine, turn off the machine by the switch.
• The ice crusher cannot be used by children without adult supervision.
OPERATION
• The ice crusher is only used to crush ice, it can’t be used for other purposes.
• Operate the machine by following the steps as below.
1. Lift the hopper lid’s handle before plugging in. Make sure your socket is suitable for the ice crusher and the
ground wire is reliable. The machine operates 110V and 120V. Place the ice tray under the outlet to catch
the crushed ice.
2. Pour ice cubes in hopper. Do not allow ice cubes to protrude from the hopper’s rim.
3. Flip power switch on.
4. Use constant pressure to press the ice cubes into the hopper with the lid’s handle for the blade to begin
crushing ice. Lift the hopper lid once the ice cubes are finished.
5. Turn off the switch and unplug the ice crusher.
6. Wipe the ice crusher dry for your next use to prevent any contamination during storage. Store in a dry
place.