Omcan 45923, Инструкция по эксплуатации

Страница: 10 / 20

10
Troubleshooting
Figure Drawings
THE MACHINE STOPS BECAUSE THE MOTOR HAS OVERHEATED (THE CASINGS AROUND THE
MOTOR UNITS ARE HOT)
• Remove the plug from the power supply socket and follow the instructions in the section on “motor over-
heat safety feature”.
THE MACHINE STOPS BECAUSE OF A JAM
• See the section on “jamming”.
THE MACHINE IS NOISY
• Check the parts are positioned correctly.
• Check no part has been damaged by a fall or the suchlike: if so, replace this part.