Omcan 44644, Инструкция по эксплуатации

Страница: 8 / 16

8
Operation
Maintenance
Troubleshooting
CUSTOM PARAMETER SETTING
The sealing time, giving in time and giving out time can be user defined. There is an option for using or not
using the electrical eye, which is useful for the polished membrane, aluminum membrane, ect.
Parameters Code Meaning
Sealing Time H H (02~22): 0.2~2.2s
Giving In Time C C (00~10): 0~1s
Giving Out Time F F00: using electrical eye.
F (01~20): blank membrane.
The following procedures should be completed every day:
1. Make sure the heating disc is clear.
Attention: If you want to clean the disc with a damp cloth, the unit must be disconnected from the
power supply and cooled completely.
2. Make sure the platform is clear, and ensure the guide rails are well lubricated.
3. Make sure the sink is clear.
4. Make sure the electrical eye and the micro switch is clear.
5. Make sure the membrane cutter is clear by using the auto cutter washing function.
Problem Possible Cause Solution
The graphic pattern skips before
the machine seals.
The membrane is not in the
electrical eye gap.
Place the membrane in the gap.
The electrical eye is dirty. Clean it.
The sensitivity of the electrical eye
is mismatched.
Adjust it according to the
instructions on the machine.
The cup is squashed. The height of the cup tray is set at
the default for 500cc cups.
Adjust the cup height.
The membrane logo is not
centered during sealing.
The electrical eye is misaligned. Adjust the electrical eye.
The positioning ring is misaligned. Adjust the positioning ring.