Omcan 40619, Инструкция по эксплуатации

Страница: 8 / 16

8
Maintenance
Before carrying out any work on the appliance, it must in all cases be unplugged from the mains power
supply and the motor start capacitor discharged.
DISCHARGING THE CAPACITOR
Use a screwdriver with insulated handle to touch the 2 connectors on the capacitor (12). The appearance of an
electric arc shows that the capacitor has discharged.
SPARE PARTS
IMPORTANT: Use of spare parts other than certified original SANTOS parts is prohibited.
This machine requires no specific maintenance. The bearings are lubricated for life. If work is required to
replace worn parts such as start relay or the electric or other components, refer to the parts list.
For all spare part orders (see references in the exploded view at the end of the manual), state:
• The type.
• The machine serial number.
• The electrical specifications recorded under the machine.
The complete disc (6) can be considered to be a part subject to wear.
For the machine to operate properly, it is recommended that a check is also made that the seal (13) is in good
condition, in particular the absence of any signs of tearing of the lip.
CLEANING
The appliance should neither be cleaned in a jet of water nor with a high pressure spray.
1. Put the appliance on stop position by pushing the On/Off button and disconnect the plug.
2. Remove the chute + lever assembly and the grating disk.
3. Wash the chute + lever assembly, the grating disc and the drawer with washing-up detergent, rinse, dry
and reassemble the unit.
4. The frame is to be sponged clean then dried. Polish from time to time with a non-abrasive product for
windows or a cleaning agent for metal.