6
Maintenance
Once the griddle is placed in a position by consulting International Standards and regulations. Cleaning the
cast iron plate is thoroughly advised. Warm up the cast iron plate for 10 minutes until all smoke and/or odor
has dissipated. Switch off and unplug the unit, then use warm, soapy water to clean, followed by a rinse with
warm water. Be sure to always wash the grill plates after each use to remove any residue that may have
accumulated. For cleaning cast iron plate, please use warm soapy water while still warm. Do not use cold
water on hot plate. After cleaning, be sure the oil tray must be dry thoroughly before putting it back to the unit.
Do not immerse completely in water or any liquid to clean and the appliance should not be cleaned with a
water jet.
NEVER USE COLD WATER ON THE HOT PLATE.
Installation
Operation
The griddle should be placed on a solid leveled surface. If the unit is placed in close proximity to a wall,
partitions, kitchen furniture, decorative finish, etc. it is recommended that they be made of non-combustible
material. If not, they should be clad with a suitable non-combustible heat-insulating material and fire prevention
regulations should be enforced.
Always preheat the grill before use until the ready light illuminates. Lift the top grill plate, arrange food on
the bottom plate and bring top plate back down to make contact with food and begin cooking. If additional
sandwiches are desired. Lower the lid to preserve the heat while you prepare the additional sandwiches. When
not cooking, the thermostat is turned off, unplug the unit.
If the Omcan Grill does not work, please check the following:
1. The power supply is correct and switched on.
2. The positions of switch and thermostat are correct.
Technical Specifications
Dimensions (DWH)
23” x 19” x 14”/ 584.2 x 482.6 x 355.6mm
Item Number
19937