omake Omk.SZP01.E11.0101.Z5F, Руководство пользователя, Страница: 33 / 49

31
D
– OPERATION INFORMATION
Figure 1
A: ON
– OFF BUTTON
B: PULSE BUTTON
C: SPEED ADJUSTMENT BUTTON
- Usage:
Before using the machine, make sure to do its first cleaning. Make sure that the protective
spray sprayed on the chamber and body is cleaned.
Insert the shredder blade into the chamber and ensure that the structure at the end of the
main shaft is fully seated in the slot in the blade hub.
This device has a number of safety systems. For this reason, the device will not operate if
the chamber is not fully seated or if the lid is not fully closed. Never operate the device when
the chamber is empty and the lid is not attached. While operating the device, determine the
speed setting according to the type of work to be done and operate it by pressing the ON-
OFF button. When you start the machine for the first time, check the rotation direction of the
blade. Do not press all the buttons on the control panel at the same time. Otherwise, you will
cause malfunctions that are expensive to repair. After the process in the chamber is
finished, press the ON-OFF button. If you want to perform a shredding operation completely
under your control, you can shred the material in the chamber by pressing the PULSE
button as long as you press the button. When you remove your hand from the button, the
shredding process will stop. Before emptying the chamber of the machine, remove the blade
from the chamber and empty the material in the chamber.