omake Omk.FKM02.E15.0002.Z5F, Руководство пользователя

Страница: 29 / 37

27
-Service Menu;
-When the device is off, the service menu is accessed by pressing and holding the
button for 5 seconds.
-When in the service menu, it is possible to switch between parameters with the help of
the buttons next to the temperature screen. Parameter value range is
adjusted with the help of buttons next to the time display.
-Press the button to exit without saving the change in the parameter menu, and the
button to exit by saving.
Parameter Explanation Min Value Max Value Unit Factory settings

Hysteresis
   

PCB temperature
− −  −

Temperature Display Unit
  − 

Thermocouple Type
Selection
  −

Maximum Set Temperature
to be Adjusted
   

Maximum To Be
Adjusted
Time
 
Minute

Table 1: Service Parameters
-Device Error Codes;
−−
Phase Reading Error: Check the energy connection of the device.
−−
Thermocouple Reading Error: Check the thermocouple.
−−
Thermocouple Connection Error: Check the thermocouple connections.
−−
Relay Board Temperature Error: Relay board temperature needs to be lowered.