process and one by one each time. You can number the Intelligent Diaper Sensors by a sticker for
corresponding to the link button on Dock.
2. Battery charge
Omago Intelligent Diaper Sensor uses a built-in rechargeable battery. Before starting to use,
please insert the sensor into charge slot for charging the battery completely.
When the link button led on Dock flashing purple, please inert the sensor into charge slot for
charging. The charging led will become constant green after complete charging.
3. Intelligent Diaper Sensor re-paired with the Dock
When the sensor inserting to charge slot for charging, it will be automatically unpaired with the
corresponding link button on the Dock. The link button will flash blue. You can press the link
button off. Take a new unpaired Intelligent Diaper Sensor and re-pair it with this link button by
the above pairing process and numbering.
If the Intelligent Diaper Sensor is out of connection range, the link button led on Dock will flash
blue and sensor led will flash red. For example, if the baby is carried away from the nursery room
(the link button corresponding to the Dock will flash blue and the sensor flashes red), it will
automatically connect to the Dock again when coming back to the nursery room.
4.
Put Smart Diaper Sensor into strap and stick to the position of the diaper corresponding to
the human excretory hole to get the best effect.
5.
When the Sensor detects PEE volume of the diaper has reached a certain level or the stool,
the breathing led on the Dock will flash, and the corresponding sensor connection button will flash
blue and red. Please change the diaper for cleaning purposes. After changing the diaper, the
Dock breathing led will be off and the link button turns constant blue.
