6
Other information
77
EN
Problem
Possible cause
Solution
The display is blank.
The battery is not inserted
properly.
Check that the positive and negative
terminals of the battery are placed
correctly (
g
P.8).
The remaining battery power
is low.
Replace or charge the battery
(
g
The power is OFF.
Turn the power ON (
g
P.9).
Unable to operate the
voice recorder.
The remaining battery power
is low.
Replace or charge the battery
(
g
The power is OFF.
Turn the power ON (
g
P.9).
The voice recorder is in HOLD
mode.
Release HOLD mode (
g
P.20).
Unable to record.
There is no remaining memory.
Erase unneeded files (
g
P.48).
The maximum number of
recordable files has been
reached.
Select another folder (
g
Playback is inaudible.
The earphones are connected
to the earphone jack.
To output the playback through the built-
in speaker, disconnect the earphones.
The volume is set to [
00
].
Adjust the volume (
g
P.37).
The recording is too
quiet.
A low recording level has
been set.
Redo recording after setting the
recording level to [
High
] (
g
The recording target is too far
away.
Bring the voice recorder closer to the
recording target.
The output level of the
connected external device may
be too low.
Adjust the output level of the external
device.
Troubleshooting