OM SYSTEM OM-1 Mark II, Инструкция по эксплуатации

Страница: 427 / 566

Follow the on-screen instructions in OM Image Share to scan the QR code and adjust
connection settings.
If you are unable to scan the QR code, follow the on-screen instructions in OM Image Share
to adjust settings manually.
Bluetooth
®
: To connect, select the local name and enter the passcode displayed in the
camera monitor into the Bluetooth settings dialog in OM Image Share.
Wi-Fi: To connect, enter the SSID and password displayed on the camera monitor into the
Wi-Fi settings dialog in OM Image Share.
A
on the screen will turn green when pairing is complete.
The Bluetooth
®
icon indicates the status as follows:
C
: The camera is emitting wireless signal.
D
: Wireless connection has been established.
To end the Wi-Fi connection, press MENU on the camera or tap
B
on the monitor screen.
You can also turn the camera off and end the connection from OM Image Share.
At default settings, Bluetooth
®
connection is kept active even after Wi-Fi connection is
terminated, allowing you to shoot remotely with a smartphone. To set the camera to also
terminate Bluetooth
®
connection when terminating Wi-Fi connection, set [Bluetooth] to
[Off].
427
Pairing the Camera and Smartphone (Wi-Fi
Connection)
6.
-
-
-
-
7.