OM POWER OM4000A, Инструкция по эксплуатации

Страница: 20 / 36

20
To finish Antenna switch configuration you can either press AUTO or MAN.
5.2.5. Bandpass filter switching
Switching of external band pass filters is automatic and needs to follow pin out of BPF connector.
For more details see
Example of connection with antenna switch and BPF in the Appendix.
5.2.6. Loading factory default settings
In the rare case of needing to restore factory default settings press SET and scroll using UP /
DWN to LOAD DEF VALUES and confirm by SET.
mmm
Then select how many antennas you want
per current band (1 or 2) and always
confirm your selection by pressing SET.
mmm By scrolling UP / DWN you assign which
PORT is used on your external antennas
switch for this particular antenna. (ANT 1
ON PORT 01).
Shall you decide to use 2 antennas for this
band, then after confirming that with SET
configuration continue to the other
antenna selection / port selection.
In the rare case of needing to restore
factory default settings press SET and scroll
using UP / DWN to LOAD DEF VALUES and
confirm by SET.