Important safety instructions:
The amplifier contains high voltage circuits. Never turn the amplifier on
without the upper lid in place.
The OM3006 amplifier is not to be used in a wet or humid environment nor
to be exposed to rainfall.
The amplifier must be installed in such a way that free flow of hot air from
the tube is allowed. The amplifier must not be installed in a constrained
surrounding (i.e. tight shelves etc.)
During long operation the upper lid and the vent grid of the amplifier can
reach high temperatures that can cause burn injuries. Do not touch these parts
of the amplifier during operation.
The amplifier must be grounded during operation.
During operation the amplifier must be installed in such a way that the rear
power supplies are accessible.
The amplifier can be operated only if both supply cables are connected.
OM3006 reaches optimal parameters when it is connected to 2 phases.
Do not turn the amplifier on without having connected the antenna.
A hazardous HF voltage may built up on the antenna connector after turning
the amplifier on with no antenna connected.
Before opening the upper lid of the amplifier make sure that both power
supplies have been disconnected for at least 5 minutes allowing the
electrolytic capacitors to discharge fully. Never turn the amplifier on without
the upper lid in place.
Make sure that all screws holding the case together are properly in place and
tied before carrying the amplifier by the handles.
The amplifier is an A category product. In a household it can influence other
electric appliances. In such cases the user is to take proper actions to mitigate
this disturbance.
