31
5.4.
Operating mode
In STBY the amplifier is in bypass-mode and your transceiver is directly connected to the antenna.
Maximum allowed power in bypass mode is 100 Watts! Passing RF power is not measured and
displayed if PA is either in standby mode or turned OFF.
Touch the
OP/STBY
button
to activate operating mode. In the
OPERATE
mode you can select fan speed,
switching an external RX preamplifier ON or OFF, but it is not possible to go to the Setup menu.
Before you push PTT for the first time, set the RF power in your TCVRr to the minimum
(
from 3 to 5
watts
)
!!!
Set
OPERATE
mode, type of operation and press PTT. You can check measured parameters of PA.