18
5.2.2.5.
Bias SSB No.1
This parameter will be checked without the possibility to change it. When „Settings menu“
appears in the upper line, select „Bias SSB No.1“ in the bottom line. To view SSB Bias press
PRE.
In couple of seconds you will see the value of drain current in the second line (about
2,7A). Do not leave this status active long time. Use the
SET
button to release checking.
5.2.2.6.
Bias CW No.1
This parameter will be checked without the possibility to change it. When „Settings menu“
appears in the upper line, select „Bias CW No.1“ in the bottom line. To view CW Bias press
PRE.
In couple of seconds you will see the value of drain current in the second line (about
0,2A). Do not leave this status active long time. Use the
SET
button to release checking.