13
OPER
- short press to switch between Standby and Operation mode
SET
-
long press (
about 2,5 seconds
) to enter the Settings menu (green LED is ON)
-
short press to release the Settings menu (green LED is OFF)
-
short press to confirm parameters in the Settings menu
-
short press to move cursor to the right in editing mode
-
long press to release editing mode and confirms Own text
PRE
- short press to switch preamplifier ON and OFF
-
short press to start editing mode in the Settings menu
-
short press to move cursor to the left in editing mode
CW/SSB
- long press to change between CW (CW LED is ON) and SSB mode (LED is OFF)
UP–DWN
- short press to list in LCD menu
- short press to change parameters
- short press to scroll trough the alphabet in editing mode
UP
- long press to enter Hardware SETTINGS menu –
not available for users
- short press to release the SETTINGS menu
5.2.
Preparation for operation
After turning on the power switch on the front panel power amplifier will automatically go
into standby mode.
NOTE
Some of next preparation steps are accessible only in standby mode.
