Olympus VR-350, Инструкция по эксплуатации

Страница: 32 / 77

32
EN
When the white area is not large enough or when the
color is too bright, too dark, or loud, the white balance
cannot be registered. Return to Step
2 . Or, set the
other white balance.
Selecting the ISO sensitivity
1
Select the ISO setting option in the shooting
function menu.
1/400 F3.0
P P
0.0 0.0
MENU MENU
ISO Auto
1/400 F3.0
AUTO
WB
AUTO
WB
16
M
AUTO
ISO
AUTO
ISO
HIGH
ISO ISO
HIGH 1600
ISO ISO
1600 100
ISO ISO
100
2
Use HI to select the setting option, and
press the
Q
button to set.
Option Description
ISO Auto
The camera automatically adjusts the
sensitivity according to the shooting
scene.
High ISO Auto
The camera uses a higher sensitivity
compared to [ISO Auto] to minimize
blur caused by a moving subject or
by camera shake.
Value
The ISO sensitivity is fi xed to the
selected value.
In the ISO setting, although smaller values result in
less sensitivity, sharp images can be taken under fully
lit conditions. Larger values result in higher sensitivity,
and images can be taken at fast shutter speeds even
under low light conditions. However, high sensitivity
introduces noise into the resulting picture, which may
give it a grainy appearance.
Sequential shooting (Drive)
Pictures are taken sequentially while the shutter button
is held down.
1
Select the drive option in the shooting
function menu.
P P
0.0 0.0
MENU MENU
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
2 2
Single
16
M
Option Description
o Single
One frame is shot each time the
shutter button is pressed.
j
*1
Sequential
Take sequential shots using the
focus, brightness (exposure) and
white balance set in the
fi rst frame.
c
High-
Speed1
The camera takes sequential shots
at a faster speed than in [
j ].
d
High-
Speed2
The camera takes sequential shots
at a faster speed than in [
c ].
*1 The shooting speed varies depending on the settings
for [Image Size/Compression] (p. 33/p. 34).