Olympus VH-510, Инструкция по эксплуатации

Страница: 32 / 79

32 EN
When the white area is not large enough or when the
color is too bright, too dark, or loud, the white balance
cannot be registered. Return to Step
2
. Or, set the
other white balance.
Selecting the ISO sensitivity
1
Select the ISO setting option in the function
menu.
1/400 F3.3
P P
0.0 0.0
MENU MENU
12
M
1/400 F3.3
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
6400
ISO ISO
100
ISO ISO
100 HIGH
ISO ISO
HIGH 6400
ISO Auto
2
Use
HI
to select the setting option, and
press the
A
button to set.
Option Description
ISO Auto
The camera automatically adjusts
the sensitivity according to the
shooting scene.
High ISO Auto
The camera uses a higher sensitivity
compared to [ISO Auto] to minimize
blur caused by a moving subject or
by camera shake.
Value
The ISO sensitivity is fi xed to the
selected value.
In the ISO setting, although smaller values result in
less sensitivity, sharp images can be taken under fully
lit conditions. Larger values result in higher sensitivity,
and images can be taken at fast shutter speeds even
under low light conditions. However, high sensitivity
introduces noise into the resulting picture, which may
give it a grainy appearance.
Sequential shooting (Drive)
Pictures are taken sequentially while the shutter button
is held down.
1
Select the drive option in the function menu.
P P
0.0 0.0
MENU MENU
12
M
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
2 2
Single
2
Use
HI
to select the setting option, and
press the
A
button to set.
Option Description
o
One frame is shot each time the
shutter button is pressed.
j
*1
The camera takes sequential shots
at approximately 5 frames/sec.
c
The camera takes sequential shots
at approximately 15 frames/sec.
d
The camera takes sequential shots
at approximately 60 frames/sec.
*1 The shooting speed varies depending on the settings
for [Image Size] (p. 33) or [Compression] (p. 36).
When set to [
c
] or [
d
], [Image Size] is limited to
[
3
] or lower, and the ISO sensitivity is fi xed to [ISO
Auto].
When set to [
j
], the fl ash (p. 20) cannot be set to
[Redeye]. When set to other than [
o
] or [
j
], the
fl ash is fi xed to [
$
Flash Off].
When set to [
c
] or [
d
], the digital zoom (p. 37) is
not available.