CCD color camera UC 50
14
4.2
Step 2: Install the software
To operate the camera with your PC, the camera driver has to be installed. This is
automatically done when installing the software you use to operate the camera (see
chapter 3.3 on page 12).
Do the following:
1)
Close all running application programs, including the application programs that
run in the background, for example, antivirus software.
2)
Place the software DVD into the corresponding drive.
"
The installation program starts automatically.
Follow the
instructions of the
installation wizard.
3)
Follow the instructions of the installation wizard, make the necessary entries,
then click the
Next >
button to continue.
4)
In the
Image Source Selection
dialog box, select the
Olympus Soft Imaging
Solutions
manufacturer. If the
UC50
camera is currently deselected, select the
corresponding check box.
5)
At the end of the installation, the files are copied to the PC. You can then
finalize the installation procedure.
"
The software and the camera driver have now been installed on your PC.
Log on as an administrator
To be able to install software, you must log on to your PC as an administrator. If
you don't have administrator rights, contact your company's authorized IT
specialist.
