6
Fig. 2
Fig. 3
Attaching the UIS Mirror Unit
(Figs. 2 & 3)
1. Using the Allen screwdriver provided with the microscope frame, loosen
the clamping screw of the mirror unit replacement cover @ on the side
you want to attach the mirror unit.
2. Slide the light path selector lever ² to expose the mount dovetail ³.
3. Remove the light path selector lever ² by turning it in the counter-
clockwise direction, screw it into the threaded screw hole | on the
mount dovetail, and slide out the mount dovetail to expose the mirror
unit mount dovetail ƒ.
4. Slightly loosen the mirror unit clamping screw … using the Allen screw-
driver, fit the dovetail on the mirror unit † all the way into the mount
dovetail ƒ and tighten the clamping screw … firmly.
5. Return the mount dovetail ³ to the original position and remove the
light path selector lever ².
6. Attach the replacement cover @ and light path selector lever ² to the
original positions.
}Perform the same procedure when attaching a UIS mirror unit on the
other side of the U-DPCAD.
@
²
³
|
ƒ
…
†
