1
U-AW
IMPORTANT
If the device is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the
device may also be damaged. Always use the device as outlined in this instruction manual.
The following symbols are used to set off text in this instruction manual.
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury or damage to the equipment or other property. It may also be used to
alert against unsafe practices.
} : Indicates commentary (for ease of operation and maintenance).
CAUTION
The motorized attenuator wheel can be installed in either a reflected light or
transmitted light illumination system. It can adjust the illumination brightness in six
steps (transmittances: 100%, 25%, 12.5%, 6%, 1.5% and 0%) with motorized operation.
SAFETY PRECAUTIONS
1. Before connecting the motorized attenuator wheel, be sure to set the main switch of the control box (BX3-CBH,
U-CBM, IX3-CBH, IX3-CBM) to “\” (OFF) or unplug its power cord.
2. Be careful not to insert your finger or let a foreign object enter inside the area in which the motorized attenuator
wheel is installed.
3. If this product is used in combination with laser products classified above CLASS 1, this instruction manual is not
effective. Follow the instruction manuals of the laser products.
Safety Symbols
The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment
in the safest possible manner.
Symbol
Explanation
Indicates that the surface becomes hot, and should not be touched with bare hands.
Caution labels
Caution labels are placed at parts where special precaution is required when handling and using the system. Always
pay attentions to the caution labels.
Positions of caution
labels
· Motorized attenuator wheel
(U-AW)
If the caution label becomes dirty or is peeled off, contact Olympus for replacement.
[Caution against high temperature]
