Olympus SZX9, Инструкция по эксплуатации

Страница: 26 / 34

SZX
22
9-4 Revolving Nosepiece SZX-2RE
1 External View
Nosepiece mount
2 Assembly
(Figs. 29 - 32)
Fig. 29
Fig. 30
1. Attach the hand guard ² to the revoling noseplece @ by tightening the
provided 2 clamping screws ³ (M3 –– 4 mm long) using the provided
Allen wrench (for M3 screws). (Fig. 29)
2. Remove the observation tube and intermediate attachment from the zoom
microscope body.
3. Remove the zoom microscope body and focusing assembly from the
pillar, and place them upside down on a flat desk surface.
# Place a soft sheet made of rubber or similar material on the desk
surface.
4. Remove the objective from the zoom microscope body and remove the
objective mount ƒ by loosening the 3 clamping screws | using the
provided Allen wrench (for M3 screws). (Fig. 30)
Objective mounts
Hand guard
Allen wrench
(for M3 screws)
Clamping
screws
M3 –– 4 mm long (x 2)
M3 –– 6 mm long (x 3)
@
²
³
|
ƒ