5
OPERATION
(Fig. 4)
1. Press the “ ” (ON) segment of the main switch @ to turn on the LED
illuminator.
The LED illuminator can be used in both transmitted and reflected light
illumination.
2. Turn the transmitted light intensity control knob ² and reflected light
intensity control knob ³ clockwise to increase the brightness.
Objectives and illumination performances
Auxiliary objective
Transmitted light
2
Adjusting the Reflected (Oblique) Illumination Angle
Hold the oblique light illuminator and adjust its angle so that the
illumination light hits the specimen.
3
Adjusting the Focus Adjustment Knob Tension
Use the same procedure as the procedure for the standard stand, which
is described in the instruction manual for the microscope body.
Fig. 4
Lighting the Illuminator and Adjusting
the Light Intensity
1
3
1
2
Reflected light
110 AL 0.5X
110 AL 0.62X
110 AL 0.75X
110 AL 1.5X
110 AL 2X
Zoom 1.5X or more
*
Zoom1.2X or more
*
Zoom 1X or more
*
Zoom 1.2X or more
*
Any magnification available.
} When the TV light path of the SZ61TR is used with the image pickup CCD size of 2/3 in. or more, the light in the
peripheral area may be insufficient.
*
Irregularities in illumination or insufficiency in the peripheral light may occur at lower magnifications than mentioned.
**
This is because the illumination is obscured by the objective.
SZ2 series
Auxiliary objective
Transmitted light
Reflected light
DFPL 0.5X-4
DFPL 0.75X-4
DFPLAPO 1X-4
SZX-ACH 1.25X
DFPL 1.5X-4
Zoom 1.6X or more
*
Zoom 1.25X or more
*
Zoom 1.25X or more
*
Any magnification available.
SZX7
DFPL 2X-4
SZX-ACH 1X
Zoom 3.2X or more
*
Not available
**
Zoom 1X or more
*
