Recording sound with still pictures
71
5
A
d
d
iti
on
al sh
oo
tin
g
fu
nctio
n
s
1
Use the arrow pad to choose at
which edge you want to
connect the pictures.
q
: The next picture is connected at
the right edge.
p
: The next picture is connected at
the left edge.
s
: The next picture is connected at
the top.
r
: The next picture is connected at the bottom.
2
Make sure that the edges of the pictures overlap, then take
the pictures.
• The focus, exposure and white balance are set by the first picture. Do not
select an extremely bright subject (such as the sun) for the first picture.
• You cannot adjust the zoom after the first picture.
• Panorama shooting is possible for up to 10 pictures. When you have taken
10 pictures, a warning mark
g
is displayed.
3
Press
Z
to exit panorama shooting.
Sound can be recorded when taking still pictures. Recording starts about
0.5 seconds after the shutter is released and lasts about 4 seconds.
When this function is enabled, sound is recorded automatically every time
you take a picture.
Top menu
[MODE MENU]
[CAMERA]
[
R
]
[ON]
g
Note
• Panorama mode is not available when there is no card in the camera.
Panorama mode is only available with Olympus cards.
• During panorama shooting, the flash, sequential shooting, and recording sound
with still pictures are not available.
• The camera itself cannot connect panorama pictures. The OLYMPUS Master
software is necessary to connect the pictures.
Connects pictures from
left to right
Recording sound with still pictures