117
7
Setti
ng
s
Setting the date and time in another time
zone (DUAL TIME SETUP)
This function allows you to set a date and time in another time zone (dual
time), separate from the settings in [
X
]. After setting, you can switch
between the new setting and the time set in [
X
].
Top menu
[MODE MENU]
[SETUP]
[DUAL TIME SETUP]
g
“Using the menus” (P. 17)
(
Setting dual time
1
Select [ON], and press
q
.
2
Press
sr
to set the year, and
press
q
to move to the month
setting.
• To move back to the previous setting,
press
p
.
• The first two digits of the year are fixed.
• The date format is the same as that set
in Step 1 of [
X
].
3
Repeat this procedure until the
date and time are completely set.
• The time is displayed in the 24-hour format. Consequently, 2 p.m. is
displayed as 14:00.
4
Press
Z
.
• For a more accurate setting, press
Z
when the time signal hits 00 seconds.
• The date and time switches to dual time.
(
Switching the date and time
1
Select [OFF] or [ON], and press
Z
.
OFF
Switches to the date and time set in [
X
].
ON
Switches to the date and time set in [DUAL TIME SETUP].
m/ft
ON
OFF
PIXEL MAPPING
CAM
SETUP
MEM
PIC
DUAL TIME
SETUP
20
0
5 . 01 . 01
00 : 00
OK
DUAL TIME SETUP
SELECT
GO
SET