Olympus SH-21, Инструкция по эксплуатации

Страница: 28 / 82

28 EN
Taking pictures with [Auto] Taking pictures with [Auto]
1 Point the camera to the start position.
●
Use FGHI to select the shooting direction.
2 Press the shutter button to begin shooting. Move
the camera slowly in the arrow-marked direction that
shown on the screen.
MENU Cancel OK
Save
AUTO
FULL
Guide
3 When shooting reaches the end of the guide on the
screen, it
fi
nishes automatically.
● The camera automatically processes the images
and the combined panorama image is displayed.
●
To stop shooting in the middle, press the shutter
button or
A
button. If the camera pauses for a
while, shooting automatically
fi
nishes.
If the message “Image was not created.” is displayed,
shoot again.
To exit the panorama function without saving an
image, press the

button.
Taking pictures with [Manual] Taking pictures with [Manual]
1 Use FGHI to specify at which edge the next
picture is to be connected.
Direction for
combining the next
frame
OK Set
MANUAL MANUAL
2 Press the shutter button to take the
fi
rst frame. The
white-boxed part of the
fi
rst frame is displayed on joint
area 1.
1st frame
1 2 1 2
MENU OK Save Cancel
MANUAL MANUAL MANUAL MANUAL
3 Compose the next shot so that joint area 1 overlaps
joint area 2.
4
Press the shutter button to take the next shot.
Press the
A
button to combine just 2 frames.
5 Repeat steps 3 and 4 to take a third frame.
● After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving an
image, press the

button.
Taking pictures with [PC] Taking pictures with [PC]
1
Use FGHI to select the direction that the frames
are combined.
2 Press the shutter button to take the
fi
rst frame, and
then point the camera for the second frame. The
shooting procedure is same as that of [Manual].
Panorama shooting is possible for up to 10 frames.
3
Repeat Step
2
until the number of desired frames is
taken, and then press the
A
button or

button
when
fi
nished.
Refer to the PC software help guide for details on
how to make panorama images.