Olympus SC1 Скачать руководство пользователя страница 12

Страница: 12 / 121

Important Information — Please Read Before Use

SC-1 INSTRUCTION MANUAL



Intended use

Same as commercial, it can be used for browsing, creating or editing documents, accessing the

internet, and viewing or browsing websites or videos.



Instruction manual

This instruction manual contains essential information on using the tablet safely and effectively. Before

use, thoroughly review this manual, understand the contents thoroughly, and use the equipment as

instructed.

Keep this instruction manuals in a safe, accessible location.

If you have any questions or comments about any information in this manual, contact Olympus.



Terms used in this manual

Important Information — Please Read Before Use

Cradle

Holds and charges the tablet.

Handle

Used to move the cradle to an easy-to-use position.

Holder

Used to hold the tablet to the cradle.

System Control Arm

Cradle to be fixed to this arm.

Tap

“Tap” means to gently touch the tablet's touch panel. It is like clicking with a mouse.

Sleep

“Sleep” means to temporarily inactivate the hardware having the status of OS and

software remain. This mode is for when not using the tablet for a while.

Содержание SC1


























































































































Результаты поиска

Содержание SC1

Отзывы:

Бренды по названию

Популярные бренды

Olympus SC1, Инструкция по эксплуатации

Результаты поиска

Содержание SC1

Отзывы:

Бренды по названию

Популярные бренды