EN 14
En
4. Installing the digital camera
Check the digital camera
Check the digital camera before loading it in the Case.
1. Battery Confirmation
Underwater shooting can reduce battery life because the picture has to be checked on the LCD monitor
before and after shooting. Make sure that you have sufficient remaining battery capacity before use.
2. Check the remaining number of pictures
Check that the image storage medium has enough room for the number of pictures you want to take.
3. Remove the strap and lens cap from the camera.
If the digital camera is loaded without removing the strap and lens cap, the Case cannot be sealed
properly and may leak.
5. Remove the filter from the digital camera
The digital camera cannot be loaded in the Case while the filter is attached to the lens.
4. Remove the eyecup from the digital
camera.
To improve the view of the pickup viewfinder,
remove the camera’s eyecup before loading it in the
Case.
The eyecup removed from the camera can be
stored in the camera table.
CAUTION:
In case the digital camera is loaded in the Case without removing the eyecup and the rear lid of the Case is
closed, the pickup viewfinder pops out.
Remove the eyecup, then push in the pickup viewfinder.
PT-E06_EN.Book Page 14 Thursday, February 26, 2009 5:04 PM
