Olympus PT-054, Инструкция по эксплуатации

Страница: 20 / 32

EN 20
EN
4. How to connect the underwater flash
Connecting the underwater optical fiber cable
To connect the UFL-2 underwater flash (optional) to the Case using an
underwater optical fiber cable (optional: PTCB-E02), follow the
procedures below.
Setting of the digital camera
Set the RC mode of the camera to ON so that the camera's built-in flash
is activated.
In case of UFL-2, turn the RC mode to OFF.
For details, refer to the instruction manual of UFL-2.
In case of UFL-1, plug the optical fiber cable in the same way.
Turn the RC mode of the camera to OFF.
How to connect the underwater optical fiber cable
1
Remove the diffuser.
2
Put the underwater optical fiber cable
plug into the optical fiber cable
insertion slot.
Insert firmly until it stops next to the
flash window cover.
3
Put the cap to the optical fiber cable
insertion slot when not in use.
PT-054_EN.book Page 20 Tuesday, September 11, 2012 7:02 PM