E-19
After sealing the Case, check that the camera functions normally.
Push the POWER button on the Case and confirm that the camera
turns ON/OFF.
Turn the mode dial knob on the Case and confirm that the camera
mode switches properly.
Push the shutter lever on the Case and confirm that the camera
shutter is released.
Press the SCENE button on the Case and confirm that the
camera’s shooting mode switches properly.
Operate other control buttons on the Case and confirm that the
camera functions as it should.
Check the operation of the loaded camera.
POWER
Mode switch
Zoom lever
SCENE
Shutter lever
When the case is used, the camera’s
Scene/Shooting mode can be confirmed
with the Scene/Shooting mode indicator
on the camera’s LCD monitor.
Shooting scene/
shooting scene mode
: • If the camera does not function properly, restart the digital
camera installation procedure from “Check the digital
camera.” on page E-14 of this manual.
CAUTION
Check the shooting scene and shooting scene mode
PT031̲E.qxd 2005.10.20 3:38 PM ページE-19
