Olympus PT-014 Скачать руководство пользователя страница 35

Страница: 35 / 38

made of aluminum, brass or stainless steel. Cleaning with pure water is
sufficient.

・Do not use commercial defogging agents. Always use the original

Olympus defogging silica gel.

・Do not use adhesive for repairs or other purposes. When repair is

required, please contact a service station of our company or your dealer.

Ｑ１１

：Please tell me about repairs.

Ａ１１

：Please contact a service station of our company or your dealer, if repair

should be necessary. Do not try to repair, disassemble or modify the
Case yourself. Repair, disassembly or modification by you or third
parties not authorized by Olympus invalidates the guarantee.

Ｑ１２：What are the model numbers of the PT-014 accessories?
Ａ１２：The following accessories are being sold.

（1）O-ring for the PT-014 body (POL-014): This is a silicone rubber O-ring packing

to be installed in the PT-014 body to make it waterproof. O-rings for other Case
models cannot be used.

（2）Silicone O-ring grease (PSOLG-1): This is a special grease for silicone

O-ring maintenance.

（3）Silica gel (SILCA-5): This is a desiccant used to prevent fogging of the

glass parts of the Case. The quantity is five bags.

（4）LCD hood (PFUD-03): This hood is installed on the LCD monitor window

of the Case to make it easier to see the LCD monitor of the camera.

（5）Balance weight for PT-014 (PWT-014): This is a weight intended to bring

the Case close to neutral buoyancy in sea water. Under consideration of
the environment, no lead is used.

※ You can order in large computer shops and camera mass sale stores.

※ Please contact your dealer or a service station of our company when

replacement is required. Replacement will be made against payment.

E-34

Содержание PT-014







































Результаты поиска

Содержание PT-014

Отзывы:

Похожие инструкции для PT-014

Бренды по названию

Популярные бренды

Olympus PT-014, Инструкция по эксплуатации

Результаты поиска

Содержание PT-014

Отзывы:

Похожие инструкции для PT-014

Бренды по названию

Популярные бренды