* This product has been designed for exclusive use with the following rear converter. It cannot be used in
combination with any other rear converter.
E-2
PER-E01 main body
Silicon O-ring (POL-E101)
Front cap
Rear cap
PT-E series waterproof case mount
Grease for silicone O-ring
Pick for O-ring removal
Waterproof lens port mount
1
Name of Parts
2
Mounting the PER-E01 between the Waterproof Case and the Waterproof Lens Port
This product is designed to be mounted between the PT-E series waterproof case and the PPO-E series
waterproof lens port.
Before mounting, first make sure that no foreign matter is attached, then apply a thin layer of the provided
silicone O-ring grease to the O-rings, the port mount thread on the PT-E series case, the threaded section of
the PPO-E series lens port or the O-ring contact surfaces.
Port mount thread
O-ring contact surfaces
O-ring
O-ring
Threaded section
Threaded section
Grease applying surface on O-rings
PER-E01
O-ring contact surfaces
of waterproof lens port
PPO-E series
waterproof lens port
PT-E series
waterproof case
Corresponding rear converter
ZUIKO DIGITAL 1.4X TELECONVERTER EC-14
PER-E01̲En 2005.6.1 3:02 PM ページ2
