251
EN
Setting Up the Camera
7
When Monitor is Opened
[Operative]
: When
[EVF Auto Switch]
is
[On]
and you
put your eye to the viewfinder, the display switches to
the viewfinder even if the monitor is open.
[Inoperative]
: When
[EVF Auto Switch]
is
[On]
and
you put your eye to the viewfinder, the display does not
switch to the viewfinder if the monitor is open.
%
The
[EVF Auto Switch]
setting screen appears when you press and hold the
u
button.
Disabling the Focus Beep
(
8
)
PA S M B
n
Disable the beep that sounds when the camera focuses.
Menu
MENU
n
e
n
3. Monitor/Sound/Connection
n
8
On
A beep sounds after successful autofocus operations. The beep sounds
only when the camera first focuses using [C-AF].
Off
A beep does not sound after successful autofocus operations.
%
You may need to adjust settings in the [Silent
s
Settings] menu in order to enable the
focus beep during silent shooting (P. 132).
External Monitor Display Options
(HDMI Settings)
PA S M B
n
Choose the signal output to external monitors connected via HDMI. Adjust the frame
rate, movie frame size, and other settings according to monitor specifications.
Menu
MENU
n
e
n
3. Monitor/Sound/Connection
n
HDMI Settings
Output Size
Choose the type of signal output to the HDMI
connector.
[C4K]
: The signal is output in 4K digital cinema (4096
× 2160) format.
[4K]
: If possible, the signal is output in 4K (3840 ×
2160).
[1080p]
: If possible, the signal is output in Full HD
(1080p).
[720p]
: If possible, the signal is output in HD (720p).
Output Frame Rate
Choose the signal frame rate according to whether the
device supports NTSC or PAL.
[60p Priority]
: Frame rate for areas supporting NTSC.
[50p Priority]
: Frame rate for areas supporting PAL.
#
[Output Frame Rate] cannot be changed when the camera is connected to a device via
HDMI.
#
Sound will not be played back unless the connected device is compatible with the sound
format.
%
You can configure detailed options for when outputting signals to an HDMI device in
movie mode.
g