Olympus OEP-5, Инструкция по эксплуатации, Страница: 53 / 88

S
yst
e
m
S
e
tu
p
5
5.3 Setup of the “USER PRESET” Menu
53
5.3
Setup of the “USER
PRESET” Menu
This menu is used to store/select the setups of this
instrument or edit the user name for every user.
To display the “USER PRESET” menu
1
Press the “MENU” button to display the menu.
2
Be sure the cursor points to “USER PRESET.”
Press the “ENTER” button to display the “USER
PRESET” menu (see Figure 5.2).
Figure 5.2
Setting “Select”
This item is used to select the setups saved for every
user. (For saving setups, see “Setting “Save”” on
page 53.) “Select” can also be set by pressing the
“LOAD USER” button on the front panel. Changing the
setup by either item or button affects the setups of both
this item and the button.
1
Press “ v ” or “ V ” to select “Select,” and press the
“ENTER” button.
2
Press “ v ” or “ V ” to select from among “1,” “2” and
“3,” and press the “ENTER” button.
The user name of the selected setup (see “Setting
“Edit”” on page 53) is displayed next to the setting
value.
3
Press “ b ” or “ B ” to select “YES,” and press the
“ENTER” button. The user name will be colored in
purple and the setting will be completed.
Setting “Save”
This item is used to save all of the current system setups
in all menus.
1
Press “
v
” or “
V
” to select “Save,” and press the
“ENTER” button.
2
Press “
v
” or “
V
” to select the number to which to
save the setups from among “1,” “2” and “3,” and
press the “ENTER” button. Setups are saved.
NOTE
You can enter the user name. See “Setting “Edit”” on
page 53.
Setting “Edit”
This item is used to enter the user name for the saved
setups in “Setting “Save”” on page 53.
1
Press “
v
” or “
V
” to select “Edit,” and press the
“ENTER” button.
2
Press “
v
” or “
V
” to select the number for entering
the user name from among “1,” “2” and “3,” and
press the “ENTER” button. The entry screen
appears (see Figure 5.3).
Figure 5.3
3
Press “ v ,” “ V ,” “ b ” or “ B ” to move the cursor on
the character to be entered.
4
Press the “ENTER” button.
5
Enter the user name by repeating steps 3 and 4 for
each character.
1: Suitable for printing a normal/ultrasonic
endoscope image
2:
Suitable for printing a normal/surgical
endoscope image
3: Suitable for printing a normal/ultrasonic
endoscope image
To change the position in which a character
is entered
1
Press “ v ,” “ V ,” “ b ” or “ B ” to move the cursor
on “
R
,” “
r
,” “
T
” or “
t
.”
2
Press the “ENTER” button.
The character entry position moves in the
direction of the arrow.