Olympus OEP-5, Инструкция по эксплуатации, Страница: 44 / 88

Op
er
at
ion
4
4.2 Control From the Front Panel
44
1
Press the “MEMORY PAGE” button repeatedly
until the memory page to be used is displayed (see
Figure 4.13 and Figure 4.14).
Each press of the “MEMORY PAGE” button
switches the memory page.
Figure 4.13
Figure 4.14
Stop Printing
Printing can be stopped when the print quantity is set to
2 or more.
1
Press the “STOP” button (see Figure 4.15).
Printing stops after completing printing of the
current sheet.
Figure 4.15
Clearing the Captured Image
Images stored in memory can be cleared.
CAUTION
• Images cannot be restored once they have been
cleared.
• An image being printed cannot be cleared.
1
While the memory image is being displayed, press
the “CLEAR” button (see Figure 4.16).
The images stored in the memory are cleared.
Figure 4.16
While the source image is being displayed, press
the “CLEAR” button.
It will change to the memory image display. Then,
press the “CLEAR” button again.
The images stored in the memory are cleared.
NOTE
The operation activated by the “CLEAR” button varies
depending on the setup. For details, see “Setting
“CLEAR”” on page 57.
MEMORY PAGE button
Monitor screen
Memory page display
LCD panel
Memory page display
STOP button
CLEAR button