NORTEC 600 — Getting Started Guide
3
Do not allow metallic or foreign objects to enter the device through connectors or any other openings.
Otherwise, an electric shock or malfunction may result.
Charging the Lithium-Ion Battery
The NORTEC 600 charges the internal lithium-ion battery while it is connected to the AC
charger/adaptor.
If the NORTEC 600 is to be used with a rechargeable battery, only use Olympus battery P/N: 600-BAT-
L-2 [U8760058]. Using any other type of battery might cause an explosion and injury.
The NORTEC 600 charger/adaptor (P/N: EP-MCA-X) is designed to power the NORTEC 600 and
charge the lithium-ion battery only (P/N: 600-BAT-L-2 [U8760058]). Do not attempt to charge any other
batteries, including alkaline batteries, using the battery holder (P/N: 600-BAT-AA [U8780295]), and do
not use any other charger/adaptor. Doing so might cause an explosion or injury.
Do not attempt to power or charge other electronic equipment with the charger/adaptor (P/N: EP-
MCA-X) unless specifically instructed in the manual. Misuse of the charger/adaptor can cause other
batteries and/or instruments to explode, leading to serious injury or death.
The lithium-ion battery is not fully charged when the instrument is shipped. You must charge the
battery for two to three hours before using the battery power to operate the instrument.
CAUTION
MicroSD card slot
Input/output (I/O) door
USB port
VGA OUT connector
(under rubber cover)
I/O connector (under
rubber cover)
Removable MicroSD card
WARNING
WARNING
IMPORTANT
