Olympus Magna-Mike 8600, Руководство пользователя

Страница: 63 / 186

DMTA-10026-01EN, Rev. D, January 2015
Initial Setup 53
3. In the MEASUREMENT SETUP screen (see Figure 3-2 on page 53), set UNITS to
ENGLISH or METRIC .
4. Press [MEAS] to return to the measurement screen.
Figure 3-2 The MEASUREMENT SETUP screen — UNITS
3.3 Setting the Clock
The Magna-Mike 8600 has a built-in date and time clock. You can set the date and the
time, and select their respective format. The Magna-Mike 8600 saves all
measurements value with their acquisition date.
To set the clock
1. In the measurement screen, press [SET UP] , and then highlight CLOCK .
2. In the CLOCK submenu, select the desired parameter: MONTH , DAY , YEAR ,
DATE MODE , HOUR , MINUTE , or HOUR MODE .
3. In the CLOCK SETUP screen (see Figure 3-3 on page 54):
a) Set the date parameters to the current date: MONTH , DAY , and YEAR .
b) Set the DATE MODE to the desired format: MM/DD/YYYY or
DD/MM/YYYY .
c) Set the time parameters to the current time: HOUR and MINUTE .
d) Set the HOUR MODE to the desired format: 12 HOUR or 24 HOUR .