8
9
1
2
3
Autofocus marks
Wide Multi-Autofocus System
Close-up Correction
Picture area
Close-up correction marks
Picture area
1. Open the lens barrier until it clicks.
The lens will extend slightly and the
LCD panel and viewfinder will turn
on. Compose your shot. Push the
zoom lever to the “T” side for
telephoto (105mm) or to the “W”
side for wide angle (38mm).
After about 4 minutes and 30
seconds of inactivity, the lens retracts
and the LCD panel goes out.
2. Position the autofocus marks on
your subject.
Do not look at the sun or other
strong light sources through
the viewfinder.
3. Press the shutter release button
halfway to focus on the subject.
After making sure that the green
lamp lights, press the shutter
release button all the way to take the
picture. After the shutter is released,
the film automatically advances to
the next frame.
TAKING PICTURES
This camera uses a wide multi-
autofocus system that makes it easier
for the focus to lock on the subject
even if it’s not in the center of the
frame.
Working Distance
The distance to your subject is 0.8 m (2.6 ft) to infinity at 38 mm wide
angle and 0.6 m (2.0 ft) to infinity at other focal lengths.
앫
If the green indicator blinks, the shutter cannot be released.
앫
Although the shutter will release when a subject is extremely close to
the camera , the subject will be out of focus.
앫
In some cases, the autofocus may be unable to lock onto a subject.
At 0.6 m (2.0 ft) camera-to-subject
distance
At other camera-to-subject
distance
The picture area moves down so that it is inside the close-up correction
marks in the viewfinder when the distance to your subject is 0.6 m (2.0 ft).
