Olympus M 770 SW, Основное руководство

Страница: 23 / 148

23
En
1 Insert the battery into the camera battery
compartment and check that the battery/
card compartment cover and the
connector cover are firmly closed.
2 Fill a bucket with fresh water, immerse
the camera in the bucket with the lens
surface downward and shake the
camera thoroughly.
3 Press the
o
button several times in
the water and close/open the lens cover repeatedly.
4 Furthermore, shake the camera further with the cover opened.
Storage and Maintenance
• Do not leave the camera in an environment at high temperature (40°C or more) or at
low temperature (-10°C or less). Failure to do so may break down water resistance.
• Do not use chemicals for cleaning, rust prevention, anti-fogging, repairing, etc.
• Failure to do so may break down water resistance.
• Do not leave the camera in water for a long time. Failure to do so will cause damage
to the camera’s appearance and/or deteriorate water resistance.
• In addition do not pour water over the camera directly from the water faucet.
•
In order to preserve the water resistant feature, as with any underwater housing,
it is recommended that the waterproof packing (and seals) are replaced
annually.
For the Olympus distributors or service stations where the waterproof packing
can be replaced, visit Olympus website for your local area.
Closing Battery/Card Compartment Cover and Connector cover
Note: The included accessories (e.g. charger) do not offer shock or water resistance.
*1 as determined by Olympus pressure testing equipment in accordance to IEC
Standard Publication 529 IPX8 - This means that the camera can be used normally
under water at a specified water pressure.
*2 This anti-shock performance is confirmed by Olympus’ testing conditions in
accordance with MIL-STD-810F, Method 516.5, Procedure IV (Transit Drop Test).
For more details of Olympus’ testing conditions, please refer to the Olympus website
for your local area.
Connector cover
Battery/card compartment
cover
d4332_basic_e_00.book Page 23 Tuesday, January 9, 2007 11:34 AM