Olympus m-1070, Инструкция по эксплуатации

Страница: 36 / 67

EN
Menus for Other Camera Settings
These settings can be made from the shooting mode top menu or playback mode top menu.
Changing the display language [
W
]
E SETUP
 W
“Changing the display language” (p. 13)
Submenu 2 Application
Languages *1
The language for the menus and
error messages displayed on the
monitor is selected.
*1 The available languages vary depending on the
country and/or region where the camera was
purchased.
Using the
K
/
q
buttons to turn on the
camera [
K
/
q
]
E SETUP
 K
/ q
Submenu 2 Application
YES
Pressing K turns on the camera
in shooting mode (Slide the lens
barrier down when shooting).
Pressing q turns on the camera
in playback mode.
NO
The camera does not turn on
when
K
or q is pressed. To
turn on the camera, slide the lens
barrier down.
Saving the shooting mode when the
camera is turned off [SAVE SETTINGS]
E SETUP

SAVE SETTINGS
Submenu 2 Application
YES
The shooting mode is saved
when the camera is turned off and
is reactivated the next time the
camera is turned on.
NO
The shooting mode is set to
P
mode when the camera is turned
on.
Erasing data completely
[MEMORY FORMAT]/[FORMAT]
E SETUP

MEMORY FORMAT/FORMAT
Before formatting, check that no important
data is left in the internal memory or card.
Non-Olympus cards and cards that have
been formatted by a computer must be
formatted with this camera before use.
Submenu 2 Application
YES
Completely erases the image data
in the internal memory
*1
or card
(including protected images).
NO Cancels formatting.
*1
Be sure to remove the card before formatting the
internal memory.
Copying images in the internal memory
to the card [BACKUP]
E
SETUP  BACKUP
Submenu 2 Application
YES
Backs up image data in the
internal memory to the card.
NO Cancels the backup.
It takes some time to back up data. Check
that the battery has sufficient power before
starting the backup, or use an AC adapter.