SUCTION PUMP KV--5
7
(2) Referring to Figure 3-1, locate the suction jar into the suction jar holder located on the front panel of the unit.
NOTE
The suction jar holder will only accommodate the 1 litre suction jar. 2 litre suction jars should be mounted on
the workstation and require the use of a suction jar mounting bracket (see Section 1). Fitting instructions for the
suction jar mounting brackets are provided with the brackets.
FIGURE 3-1
Suction jar holder
1 litre suction jar
(3) Remove the transit bung from the filter housing (retain for transportation) on the front of the unit and insert the
microbial filter with the word ‘Olympus’ facing outermost (see Figure 3-2)
FIGURE 3-2
Microbial filter
Filter housing
Filter connecting tube
Filter connecting tube 90
˚
connector
Microbial filter
(4) Connect the patient tube between the suction jar lid (Figure 3-3) and endoscope or other equipment as required.
FIGURE 3-3
Patient connecting tube
(5) Push the open end of the filter connecting tube onto the microbial filter and fully insert the 90
˚
connector into the
suction jar lid marked VACUUM (Figure 3-4).
