11
TAKING PANORAMA PICTURES
FLASH PHOTOGRAPHY
— Setting the Flash Mode
10
TAKING PICTURES
— Focus Lock
UNLOADING THE FILM
Position the autofocus frame on
your subject and press the shutter
release button halfway.
The camera beeps, and the
autofocus indicator lights in the
viewfinder. The exposure is also
locked at this time (AE lock).
If you want to position your main subject outside the center of the
frame, follow the procedure below (focus lock).
The camera automatically rewinds the film when you reach the end of
a roll. You can also rewind the film before it reaches the end.
Reframe your subject while
keeping the shutter release button
pressed halfway.
Then press the shutter release button
all the way.
Make sure the motor has
stopped and that“
”is blinking;
then open the back cover to
remove the film.
Press the mid-roll rewind
button. Do not use an
instrument with a sharp tip.
Rewinding the film before the
end of the roll
Set the Panorama switch down for Panorama
mode shooting (the Panorama lamp lights). Set
the switch up for Standard mode shooting.
Set the power switch to
to flip up the
flash. The camera will recharge the
flash, and the flash will be ready to
use. When there is insufficient light,
the flash fires automatically.
Automatically fires in the dark, with backlighting, or
under fluorescent lighting.
Significantly reduces the phenomenon of “red-eye”
(when a subject’s eyes appear red in color
photography).
Fires regardless of available light.
Auto Flash
Red-Eye
Reduction
Flash
Fill-In
Press the
/
button to
select the flash mode. The
selected mode is displayed
on the LCD panel.
In the Panorama mode, only the area inside the shaded section (see
illustration) will appear in the picture. (Non-shaded areas will not
be in the picture).
After the shutter has been released in the Panorama mode, the
Panorama lamp blinks for about 5 seconds.
Date and time cannot be imprinted in the Panorama mode.
1
2
Mode display
Flash mode
Function
No
display
1
2
Autofocus frame
Standard mode
Panorama mode
(Panorama models only)
