manualshive.com logo in svg

Olympus IPLEX FX IV8000-2, Инструкция по эксплуатации, Страница: 168 / 208

Поделиться
Скачать
Olympus IPLEX FX IV8000-2 Скачать руководство пользователя страница 168

160

Chapter 8 Storage and maintenance

8.1

Remaining battery power

When operating IPLEX FX with the battery, the LCD monitor displays the 
remaining battery power on the top right of the screen. A guideline to remaining 
battery capacity is shown as follows.

CAUTION

•

Do not record, copy, move, or delete images and do not format recording media if warning 
number (4) shown above is displayed. If the power runs out during these operations the data 
could be corrupted.

NOTE

•

If the battery continues to be used after the warning above (5) is displayed, the system will be 
shut down automatically to protect the battery against excessive discharge.

•

The remaining battery power can also be checked on the [POWER INDICATOR] of the 
battery itself. (However, the remaining battery power shown on the LCD monitor is different.) 
Press the [CHECK] button on the battery. The green LEDs will light according to the 
remaining battery power. For details, refer to the instruction manual of your battery.

•

Even when two of the green remaining power indicator LEDs on the battery are lit, the IPLEX 
FX may shut down automatically when that battery is used. This is a measure performed by 
the base unit to protect the battery against excessive discharge. It occurs more often when 
the ambient temperature drops, but it is not a malfunction. If this happens, recharge the 
battery before reusing it.

•

The remaining battery power is not displayed during the AC adapter-powered operation.

(1)

Remaining battery power about 50%.

(2)

Remaining battery power about 25% to 50%.

(3)

Remaining battery power about 5% to 25%.

(4)

Remaining battery power about 2% to 5%.

(5)

Remaining battery power about 1% to 2%.
This indicator flashes.
Replace with a battery that has been charged with the charger.

Содержание IPLEX FX IV8000-2

















































































































































































































Отзывы:

Нет отзывов