123
EN
Shooting Settings
4
•
The flash sync speed for silent modes (P. 132), High Res Shot (P. 156), and focus
bracketing (P. 178) is 1/100 s. Setting [
K
ISO] to a value over ISO 16000 when
using an option that requires the electronic shutter (for example, silent mode or focus
bracketing) sets the flash sync speed to 1/50 s. The flash sync speed is also set to 1/50 s
during ISO bracketing (P. 176).
•
Even the minimum available flash output may be too bright at short range. To prevent
overexposure in pictures taken at short range, select mode
A
or
M
and choose a smaller
aperture (higher f-number) or choose a lower setting for [
K
ISO].
Configuring flash modes
(Flash Mode Settings)
PA S M B
n
Choose which modes are displayed on the flash mode selection screen.
Menu
MENU
n
_
n
6. Flash
n
Flash Mode Settings
Reduce Red-eye
Reduce “red-eye” in portrait photos.
[No]
: The camera does not display Reduce Red-eye modes.
[Yes]
: The camera displays Reduce Red-eye modes.
Synchro Settings
Choose when the flash fires.
[First Curtain]
: The flash fires when the shutter is fully open.
[Second Curtain]
: The flash fires immediately before the shutter
closes. Moving objects appear to leave trails of
light behind them.
Adjusting flash output
(Flash Exposure Comp.)
PA S M B
n
Flash output can be adjusted if you find that your subject is over- or under-exposed
even though the exposure in the rest of the frame is appropriate.
Flash compensation is available in modes other than manual.
Super Control Panel
Q
n
Flash Exposure Comp.
•
Changes to flash intensity made with the external flash unit are added to those made with
the camera.
