Olympus IM008, Инструкция по эксплуатации

Страница: 97 / 187

Shooting
2
97 EN
 
Zoom frame AF/Zoom AF ( Super Spot AF)
You can zoom in on a portion of the frame when adjusting focus. Choosing a high
zoom ratio allows you to use autofocus to focus on a smaller area than is normally
covered by the AF target. You can also position the focus target more precisely.
Press and hold the button to which [
a
] has been assigned to cycle through the
displays as follows:
250 250 F5.6 P
L N
S-IS ON S-IS ON
ISO-A
200
F FHD
30p
1023
1:02:03
0.0
Shooting display
250 250 F5.6 P
L N
S-IS ON S-IS ON
ISO-A
200
F FHD
30p
1023
1:02:03
Off
0.0
Zoom frame AF display Zoom AF display
Press and hold /
Q
1
Assign [
a
] to the
Fn
or R button.
• To use Super Spot AF, you must fi rst assign [
a
] to the
Fn
or R button (P. 95).
2
Press the button to which [ a ] has been assigned to display the zoom frame.
• If the subject has been focused using autofocus immediately before the button is
pressed, the zoom frame will be displayed at the current focus position.
• Use FGHI to position the zoom frame.
• Press the
INFO
button and use FG to choose the zoom ratio. (×3, ×5, ×7, ×10,
×14)
3
Press the assigned button again to zoom in on the zoom frame.
• Use FGHI to position the zoom frame.
• You can change the zoom ratio by rotating the control dial.
4
Press the shutter button halfway to initiate autofocus.
• The camera will focus using the subject in the frame at the center of the screen. Use
FGHI
to choose a different focus position.
• Zoom is visible only in the monitor and has no effect on the resulting photographs.
• Press and hold the assigned button or press the
Q
button to end zoom and exit the zoom
frame AF display.
• When you are using a Four Thirds system lens, the AF will not operate with during zoom
display.
• While zoomed in, a sound is made by the IS (Image Stabilizer).
$
Notes
• Touch controls can also be used.