Olympus IM005, Инструкция по эксплуатации

Страница: 64 / 134

64 EN 64 EN
For the operation method, refer to (P. 50).

C. Exp/ISO
Choosing the standard for optimal exposure
H
[Exposure Shift]
Submenu 2 Application
p
/
5
Adjust correct exposure separately for each metering mode.
• This reduces the number of exposure compensation options available in the
selected direction.
• The effects are not visible in the monitor. To make normal adjustments to the
exposure, perform exposure compensation (P. 29).
Choosing the maximum and standard values for auto ISO
sensitivity control
H
[ISO-Auto Set]
Choose the upper limit and default value used for ISO sensitivity when
[AUTO] is selected for ISO. [High Limit]: Choose the upper limit for auto
ISO sensitivity selection. [Default]: Choose the default value for auto ISO
sensitivity selection. The maximum is 12800.
Reducing image “noise” at high ISO sensitivities
H
[Noise Filter]
Submenu 2 Application
Off
Noise reduction disabled.
Low/Standard/
High
Choose the amount of noise reduction performed at high ISO
sensitivities.
Reducing image “noise” in long exposures
H
[Noise Reduct.]
Submenu 2 Application
Off
Noise reduction disabled.
On
Noise reduction is performed with every shot.
Auto
Noise reduction is performed at slow shutter speeds, or when
the internal temperature of the camera has risen.
• The time required for noise reduction is shown in the display.
• [Off] is selected automatically during sequential shooting.