Olympus Hydro-Force1200, Руководство по эксплуатации, Страница: 20 / 45

Problem Cause Solution
Solution Tank Water source turned off Turn on faucet or find other water source
not filling Float not on valve arm Reconnect float to valve arm - Adjust to proper height/level
Float valve faulty Repair or replace float valve (NM5055)
Water hose restricted Un-kink, clean out or replace hose
Quick connects faulty Clean out or replace quick connects (AH101B, AH102B)
Solution tank Float too heavy/ Filled with water Replace float (PHY005-003)
overflowing Float & chain tangled Make sure float chain free & hanging properly
Float too high Adjust chain to set float at proper level
Float valve faulty Repair or replace float valve (NM5055)
Chemical Jug Foot valve in Filter stuck Clean out foot valve and filter
Filling with Foot valve in Filter faulty Replace foot valve and filter (PDE100-11P)
water -
Overflowing
* To reduce the risk of fire electrical shock or injury repairs to wiring should only be performed by
experienced service technicians.
If you are not experienced in checking electrical wiring contact your nearest authorized service
center to perform tests and repairs to wiring and switches.
•
Contact your distributor for additional troubleshooting
assistance, to order parts, or for advice and assistance in
performing necessary repairs.