FOCUS PX — Getting Started Guide
7
When this indicator flashes green, it indicates that the FOCUS PX is either starting up or
shutting down.
When this indicator flashes red three times after the power button has been pressed, it
indicates that the FOCUS PX instrument’s internal temperature is above the upper
temperature limit. Wait for the FOCUS PX to cool down.
When this indicator flashes red continuously, it indicates that the FOCUS PX is in safe mode
(flash memory error). Contact the After-Sales Service.
Integrating the FOCUS PX in an Automated System
The FOCUS PX was designed with flexible programmable logic controller (PLC) and software
integration features to enable easy integration into automated inspection systems (see Figure 4 on
page 7).
Figure 4 Example of a fully automated inspection system
1
For PLC and scanner integration, the connectors on the rear panel enable the FOCUS PX to be
interfaced with a PLC or a scanner to exchange the following commands (refer to the
FOCUS PX
Phased Array and Conventional Ultrasonic Data Acquisition Instrument User’s Manual
for more details):
1. Photo courtesy of SCLEAD.
