12
13
Displayed according to the
focal distance of the lens.
<AUTO>
In this mode, the flash light intensity is controlled automatically according to the lens iris (F)
setting and the amount of light input to the auto light receptor.
Available shooting range
1.
The control panel shows the light control range according
to the camera setup.
The light control range is not displayed if the camera setup
(ISO speed and lens iris (F)) does match one of the us-
able ISO speed/lens iris (F) combinations (see page 30).
In this case, the ISO and F indicators blink to alert you.
Change the camera setup (ISO speed and/or lens iris (F)).
2.
Confirm that the distance to the subject is within the light
control range.
If not, adjust the lens iris (F) or the subject distance.
The light control range varies according to the camera setup
(ISO speed, lens iris (F) and lens focal distance (ZOOM)).
Memo:
Test flash activation
Flash activation can be tested before actually releasing
the shutter.
Press the Test button for test flash activation.
The light control is OK when the AUTO CHECK lamp blinks
for about 5 seconds after the test flash activation.
If the lamp does not blink, change the lens iris (F), ISO
speed, subject distance, etc.
* The light check by means of test flash activation is pos-
sible only in the AUTO mode.
Available shooting range
<TTL AUTO>
In this mode, pre-flash is performed to measure the optimum flash intensity and then actual flash
is performed.
Displayed according to the
focal distance of the lens.
1.
The control panel shows the light control range according
to the camera setup.
2.
Confirm that the distance to the subject is within the light
control range.
If not, adjust the lens iris (F) or the subject distance.
The light control range varies according to the camera type
and camera setup (ISO speed, lens iris (F) and lens focal
distance (ZOOM)).
3.
When flash activation has been performed correctly, the
AUTO CHECK lamp blinks for about 5 seconds after the
shutter is released.
■
Light control range in AUTO mode
The displayed nearer value is 0.6 or more when the light emission section faces the front and 0.5
or more when it faces downward.
The above table shows the light control ranges in the off-flash condition.
3.
When flash activation has been performed correctly, the
AUTO CHECK lamp blinks for about 5 seconds after the
shutter is released.
ISO speed
AUTO light control range (m)
F8
F5.6 F4
F2.8 F2
F1.4
F11 F8
F5.6 F4
F2.8 F2
F1.4
F16 F11 F8
F5.6 F4
F2.8 F2
F1.4
F22 F16 F11 F8
F5.6 F4
F2.8 F2
F32 F22 F16 F11 F8
F5.6 F4
F2.8
F32 F22 F16 F11 F8
F5.6 F4
F32 F22 F16 F11 F8
F5.6
F32 F22 F16 F11 F8
F32 F22 F16 F11
1.1 - 12.7
1.3 - 14.1
1.8 - 19.8
1.9 - 21.2
2.3 - 25.5
2.5 - 28.3
2.8 - 31.8
3.1 - 35.4
0.8 - 9.0
0.9 - 10.0
1.2 - 14.0
1.3 - 15.0
1.6 - 18.0
1.8 - 20.0
2.0 - 22.5
2.2 - 25.0
0.6 - 6.4
0.6 - 7.1
0.9 - 9.9
0.9 - 10.6
1.1 - 12.7
1.3 - 14.1
1.4 - 15.9
1.6 - 17.7
0.4 - 4.5
0.4 - 5.0
0.6 - 7.0
0.7 - 7.5
0.8 - 9.0
0.9 - 10.0
1.0 - 11.3
1.1 - 12.5
0.3 - 3.2
0.3 - 3.5
0.4 - 4.9
0.5 - 5.3
0.6 - 6.4
0.6 - 7.1
0.7 - 8.0
0.8 - 8.8
0.2 - 2.3
0.2 - 2.5
0.3 - 3.5
0.3 - 3.8
0.4 - 4.5
0.4 - 5.0
0.5 - 5.6
0.6 - 6.3
0.1 - 1.6
0.2 - 1.8
0.2 - 2.5
0.2 - 2.7
0.3 - 3.2
0.3 - 3.5
0.4 - 4.0
0.4 - 4.4
0.1 - 1.1
0.1 - 1.3
0.2 - 1.8
0.2 - 1.9
0.2 - 2.3
0.2 - 2.5
0.2 - 2.8
0.3 - 3.1
0.1 - 0.8
0.1 - 0.9
0.1 - 1.2
0.1 - 1.3
0.1 - 1.6
0.2 - 1.8
0.2 - 2.0
0.2 - 2.2
3200 1600 800 400 200 100 50 25
8 (W panel) 10 (W panel)
12
14
17
25
35
42
16 (W panel) 20 (W panel)
24
28
35
50
70
85
Firing angle (mm) Upper row: FOUR THIRDS. Lower row: 135
Lens ir
is
■
Light intensity adjustment
The flash light intensity can be adjusted b3 and -3.
The light intensity adjustment must be set to ON in the
custom setup operation (page 27).
• The indicator appears in the control panel.
1.
Turn dial B to adjust the light intensity in the following steps.
0
→
+0.3
→
+0.7
→
+1.0 ... +3.0
0
→
-0.3
→
-0.7
→
-1.0 ... -3.0
2.
The display shows the light intensity adjustment value ex-
cept when the value is 0, in which case the display shows
the light control range.
3.
If the camera’s flash light intensity adjustment function is
also set, the actual flash light intensity will be the total of
the light intensity adjustment values of the electronic flash
and camera.
Note that the light intensity adjustment value displayed on
the electronic flash does not include the value set on the
camera.
Light intensity adjustment value
Light intensity
adjustment setting
Display on
the FL-50
Actual light intensity
adjustment
FL-50
+0.3
+0.3
+0.6
Camera
+0.3
Содержание FL 50 - Hot-shoe clip-on Flash
Страница 1: ......
